Medir temperaturas de CPU y Discos LINUX

A continuación les dejo estos tips para medir temperatura de CPU y Discos.
Yo lo hice en Kali Linux (basada en Debian). Pero me pueden preguntar sobre otras distros.


$ sudo apt-get update
$ sudo apt-get install lm-sensors
$ sudo apt-get install hddtemp

Como root:
# sensors-detect

 sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
 System: Dell Inc. Inspiron 1525 (laptop)
 Board: Dell Inc. 0U990C

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               Yes
Found unknown chip with ID 0xfc11

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8
Module i2c-dev loaded successfully.

Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: SDVO DDC proxy (i2c-6)
Do you want to scan it? (yes/NO/selectively): no

Next adapter: SMBus I801 adapter at 10c0 (i2c-7)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)


Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)no

Unloading i2c-dev... OK
Unloading cpuid... OK

# service kmod start
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +53.0°C  (crit = +98.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +51.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +52.0°C  (high = +100.0°C, crit = +100.0°C)

i8k-virtual-0
Adapter: Virtual device
Processor Fan: 3000 RPM
CPU:            +53.0°C
Other:          +36.0°C
Other:          +48.0°C
Other:          +42.0°C

# hddtemp /dev/sda
/dev/sda: Hitachi HTS542516K9SA00: 37°C